The Sirit push in system has been supplied to the UK market for some five years now and is standard fit to a large number of OEM trailer builders throughout the country.
 
The system is manufactured in Italy and Air Brake Connections are the Sole UK Distributors for this system.
Air Brake Connections not only sell the fittings loose but also offer a service for pre assembled kits ie:- one fitting kit per trailer as well as bracket assemblies. The system is also offered to our aftermarket customers in display packets for rack aging systems of which we also supply.
 
The benefits for this system are:-
  1. Manufactured from brass (non corrosive).
  2. Built in O rings
  3. Fully releasable fittings (the nylon tube can be taken out of the fitting easily once it has been fitted).
  4. TUV certified.
  5. Swiveling Components (easier to fit, especially on suspension)
  6. You can have three different pipe sizes in one fitting ie: (6mm - 12mm - 18mm).
     
As you can see above because of these attributes this system has fast become standard fit to the OEM's and is now finding its way into the Aftermarket.
 
Any further information required about The Sirit products please do not hesitate to contact us either by e-mail:- sales@airbrakeconnections.co.uk or telephone/ fax on the numbers below where a member of staff will be more than happy to advise. Alternately contact our Sales Team on the mobile numbers below.
       
   
       
   
       
   
       
   
       
   
                 
 
Phone: 01474-535456 - Fax: 01474-537323
e-mail:sales@airbrakeconnections.co.uk